Holster Slide
Carrying your weapon has a few problems that have been solved now. Porsche’s have VERY limited space so leaving the weapon on your belt either rubs and scratches the leather or pokes your side, making it hard to get to when needed or impossible when your weapon slides off the seat onto the floor. I’ve been there! Additionally, most mounts require drilling holes in the dash, and I didn't want to drill holes in the dash of my Porsche! So I designed this mount to solve multiple issues. Made from 6061 aluminum and powdercoated in commercial black flexsteel, it’s built to stand the test of time and carries the same warranty as all KLA products-Lifetime.
Our holster slide provides multiple mounting platforms, most commonly to fit into the empty space between the seats and console. This product mounts securely next to driver or passenger seats with a small gap space that can be easily adjusted without tools when the seat is moved. The Holster Slide is designed for most holsters with a standard belt clip and will work with any size weapon. It’s easy to assemble and install with NO DRILLING and NO POWER TOOLS required. A small Phillips screw driver is all that is needed. The Holster Slide is adjustable and extends to fit most vehicles with standard factory seats or console spaces.
No Bolt Weapon Mount
Using the bolt and caps assemble the two parts. I recommend a dab of blue Loctite on the bolts. Do not tighten completely unless the mount fits at the exact height you want it. Clean with rubbing alcohol in a 2 inch line all the way around the mount where the bolts are. Then attach the provided leather strip over the bolt heads wrapping it completely around the mount. This will ensure the bolt heads do not scratch or indent leather seats or console. When at the height that is right for you simply slide the mount down and use the two zip ties to fasten the mount under the seat rails. Some cars and holsters will not need zip ties. My 944 fits so snug it does not need them. Use your own discretion here. Hammer on the brakes a few times if you are not using the ties to make sure it stays put.
Alternative mounting using self tapping screws through carpeted area can be done if you wish the location closer to the dash