944 Odometer Gear Replacement

Step 1

1) Remove 9 screws holding front/back together.

Step 2

2) Remove 4 screws holding speedometer in housing.

Step 3

3) Gently pull off speedometer needle and remove 2 screws holding the face on.

Step 4

4) Remove 4 screws hold halves of speedometer together.

Step 5

5) Picture of two halves separated.  Brown gear on the right is the one we want to get out.

Step 6

6) Using a paperclip, push out pin holding in gear.

Step 7

7) Remove e-clips holding next 2 gears in place.

Be sure to clean the broken gear debris out of the good gears or they may bind.

Step 8

8. Be sure to clean new gear also.  It may have manufacturing residue left on it.  Reuse e-clips to hold gears in place.

Step 9

9. New gear in place and speedometer re-assembled.

Step 10

10. Be sure to get trip reset plunger into solenoid.

Step 11

11. Install the rest of the screws and job is complete.

Gear1.jpg
gearfix-2.jpg
gearfix-3.jpg
gearfix-4.jpg
gearfix-11.jpg
gearfix-5.jpg
gearfix-6.jpg
gearfix-7.jpg
gearfix-8.jpg
gearfix 9.jpg
gearfix-10.jpg