944/968 Rear Tow Point Install  

Step 1

(Passenger Side)

1. Remove the rubber plugs as seen in the picture. Some cars have bolts. We've cleaned the dirt from these to make them easier to see

2. Insert bolt in the holes from the inside of the car. Hardwar order is bolt/car/bracket/washer/lock washer/nut.

Step 2

3. Place bracket over the bolts. Add washers, Tighten nuts

4. Repeat for the other side of the car

Step 3

Here is a picture fully installed

reartow-2.jpg
reartow-3.jpg
reartow-4.jpg