top of page

911 Strut Brace Install

1) Remove front strut bolt and rear inner strut bolt.

2) Place bracket, long leg of bracket toward front of car, over holes and replace bolts.

3) Tighten to about 20 ft-lbs. 

4) Repeat for other side of car.

5) Install bar and tighten.  Hardware order is: bolt/bar/bracket/nut.

6) Repeat for other side.  

7) Turn bar to take up "slack".  Tighten backing nuts.
8) You're done!

911strut brace.jpg
bottom of page