944/968 Front Sway Bar Bracket Install 

Step 1

Pictured is the view before install. You will remove the front crossmember bolt and the two bolts in the factory sway bar bracket that hold the loop around the sway bar

Step 2

Here you see the support bracket loosely installed. Install support bracket at crossmember first. Do NOT tighten crossmember bolt yet. Install bolts at sway bar bracket and tighten. After the sway bar bolts are tight, you can now fully tighten the crossmember bolt. 

Step 3

Here is a picture fully installed

FRONT SWAY BAR install 1.jpg
FRONT SWAY BAR install 1.jpg
FRONT SWAY BAR install 1.jpg