911 STRUT BRACE INSTALL
|
1) Remove front strut bolt and rear inner strut bolt. |
|
2) Place bracket, long leg of bracket toward front of car, over holes and replace bolts. |
| 3) Tighten to about 20 ft-lbs. |
| 4) Repeat for other side of car. |
| 5) Install bar and tighten. Hardware order is: bolt/bar/bracket/nut. |
| 6) Repeat for other side. |
| 7) Turn bar to take up "slack". Tighten backing nuts. |
| 8) You're done! |